BPDVG - T-105 WNT, INDUSTRIAL LEAD ACID BATTERIES
- MSDS: BPDVG
- Manufacturer: TROJAN BATTERY CO
- Product Name: T-105 WNT, INDUSTRIAL LEAD ACID BATTERIES
- National Stock Number: 6140-00N030210
Product Identification
Product ID:T-105 WNT, INDUSTRIAL LEAD ACID BATTERIES
MSDS Date:05/01/1990
FSC:6140
NIIN:00N030210
MSDS Number: BPDVG
Responsible Party
SANTA FE SPRINGS, CA 90670
US
Emergency Phone: 800-424-9300
Info Phone: 213-946-8381;714-521-8215
Cage: 94598
Contractor
Telephone: 562-946 8381 / 800-423-6569
Cage: 94598
Ingredients
AIR. SUPPORT BRTHG. (GIVE O*2/ARTF RESP) . ING
RTECS: 9999999ZZ
GET MED
RTECS: 9999999ZZ
BRTHG. (GIVE O*2/ARTF RESP) .
RTECS: 9999999ZZ
THEN RINSE WITH WATER.
RTECS: 9999999ZZ
ING 5 COMES FROM DUST WHEN CLEANING BATTERY
RTECS: 9999999ZZ
BATTERY ACID ELECTROLYTE CONSISTS OF ING 2-4
RTECS: 9999999ZZ
1.24-1.28@80F.
CAS: 7664-93-9
RTECS: WS5600000
Fraction By Weight: 30-38%
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3; 3 STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 62-70%
620-1630F, 327C. SPEC
RTECS: 9999999ZZ
Fraction By Weight: 2-6%
OSHA PEL 0.5 MG/M3
ACGIH TLV: 0.5 MG/M3
GRAYISH-WHITE TO DARK BROWN, SILVERY
RTECS: 9999999ZZ
LEAD
CAS: 7439-92-1
RTECS: OF7525000
Fraction By Weight: 94-97%
OSHA PEL 0.05 MG/M3
ACGIH TLV: 0.15 MG/M3 DUST/FUME
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
ANTIMONY
CAS: 7440-36-0
RTECS: CC4025000
Fraction By Weight: 2-6%
OSHA PEL 0.5 MG/M3
ACGIH TLV: 0.5 MG/M3
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
10 G/M3
CAS: 7440-38-2
RTECS: CG0525000
Fraction By Weight: 0.25%
OSHA PEL 0.5 MG/M3 (AS)
ACGIH TLV: 0.01,A1 MG/M3; 9394
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
3 MG/M3 ACTION LVL
CAS: 7440-31-5
RTECS: XP7320000
Fraction By Weight: 0.3%
OSHA PEL 2 MG/M3
ACGIH TLV: 2 MG/M3(INORGANIC)
Hazards
LD50 LC50 Mixture:ZARDS.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:YES
Health Hazards Acute and Chronic:NO DATA.
Explanation of Carcinogenicity:INHAL: REMOV
Effects of Overexposure:E TO FRESH AIR. CALL MD IF SYMP PERSIST. EYES:
FLUSH WITH WATER FOR AT LEAST 15 MIN. CALL AN EYE DR @ ONCE. SKIN:
IMMED FLUSH WITH WATER. CALL MD IF IRRITATION PERSISTS. INGEST:
GIVE 2 GLASSES OF WATE R AND INDUCE VOMITING. CALL MD.
Medical Cond Aggravated by Exposure:CONTAIN WITH ABSORBENT. DO NOT
FLUSH TO DRAIN.
First Aid
First Aid:NONE SPECIFIED BY MANUFACTURER.
APPROVED WASTE MANAGEMENT FACILITY. INCINERATION
WHERE PERMITTED. DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS .
Fire Fighting
Flash Point:NONFLAMMABLE
Extinguishing Media:USE WATER, CO2 OR DRY CHEMICAL ON FIRES IN AREA.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:HYDROGEN GAS IS FORMED DURING CHARGING OF
BATTERIES & BY ACTION OF SULFURIC ACID ON MOST METALS. HYDROGEN GAS
IS FLAMMABLE & HIGHLY EXPLOSIVE. (SUPP DATA)
Accidental Release
Spill Release Procedures:STORE IN COOL, DRY AREA.
NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:COVER W/BAKING SODA (SODIUM BICARBONATE)OR SODA ASH
(SODIUM CARBONATE) &(ING 13)
Handling
Handling and Storage Precautions:MECHANICAL (GENERAL): PREFERRED.
Other Precautions:RUBBER. CHEM WORK GOG
OR FULL LNGTH FSHLD.RUBBER APRON.
Exposure Controls
Respiratory Protection:NONE SPECIFIED BY MANUFACTURER.
NONE SPECIFIED BY MANUFACTURER.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:ACID RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:FULL COVERAGE ACID RESISTANT CLOTHING MUST
BE WORN. APRON. EMER EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EXPLO HAZ: AVOID ALL SOURCES OF IGNIT: OPEN FLAMES; GLOWING MATL/OTHER
HOT OBJECTS; SPARKS/ARCS AS WHEN CONNECTING CABLES/WIRES TO
BATTERIES/OTHER ELEC SOURCES WHEN CIRCUITS ARE NOT OPEN, OR
SHORTING BATTERIES OR CABLES W/METAL TOOLS. FIRST AID PROC: H*2O
AS POSS W/O VOMIT. GET MED IMMED. INHAL:REMOVE TO FRESH (ING 10)
Chemical Properties
HCC:C1
Boiling Pt:B.P. Text:SEE ING 1
Melt/Freeze Pt:M.P/F.P Text:SEE ING 2
Spec Gravity:SEE INGRED
Solubility in Water:SEE INGREDIENT
Appearance and Odor:SEE INGREDIENT
Stability
Stability Indicator/Materials to Avoid:YES
MOST METALS.
Stability Condition to Avoid:OVERCHARGING, HIGH TEMPERATURES.
Hazardous Decomposition Products:HYDROGEN GAS IS FORMED BY ACTION OF
SULFURIC ACID ON MOST METALS & DURING CHARGING.
Disposal
Waste Disposal Methods:NOT NORMALLY REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.